Haɗin kai

Ana iya haɗa RST 25 kamar haka a cikin tsarin shigarwa:
FlG1: Haɗin relay kafin aiki.
Lokacin da aka haɗa relay kamar yadda yake a cikin FIG 1, LED's L1, L2 da L3 mai launin rawaya guda uku suna haskakawa lokacin da wutar lantarki A1 Phase L, A2 Neutral, da matakai uku "L1,"L2" da" L3" suna da alaƙa da kyau.
Idan babu ƙarƙashin overvoltage, gazawar lokaci na jerin lokaci, koren LED yana haskakawa, (an rufe tashoshi 11 da 14) kuma ana shirye-shiryen watsa shirye-shiryen don aiki.
FIG2: Haɗin relay bayan aiki.
Lokacin da aka haɗa gudun ba da sanda kamar yadda yake a cikin FIG 2, (babban wutar lantarki Al lokaci L, A2 Neutral suna da alaƙa da kyau) bayan aiki, ana haɗa nau'ikan nau'ikan "L1" da "L3" guda uku, kuma babu ƙarancin ƙarfin ƙarfi, faɗuwar lokaci, jerin lokaci, koren LED yana haskakawa (tashoshi 11 da
14 suna rufe) kuma gudun ba da sanda yana shirye don riƙe kansa.
Hakanan yana yiwuwa a haɗa wutar lantarki bayan aiki a FIG2.
Ta hanyar 1 da 2 na FIG, tashar “PE” dole ne ta zama ƙasa.

Ƙarƙashin wutar lantarki
Ana iya daidaita iyakar ƙarancin wutar lantarki da ake so zuwa -25% UN.

Ƙarfin wutar lantarki
Za'a iya daidaita iyakar ƙarfin ƙarfin da ake so har zuwa +25% UN.

Asymmetry
Lokacin daidaitawa akan-da ƙarancin wutar lantarki, ana kuma daidaita iyakar asymmetric.

Jinkirin Lokaci
Ana iya daidaita lokacin kashewa ta ma'aunin "Lokaci' Jinkiri" daga 0.1….5 seconds. Tare da wannan aikin yana yiwuwa a daidaita lokaci don gano gazawar.

Ikon Tuntuɓi
Idan wani lokaci ya kasa yayin aiki a lodi ko ɗaya daga cikin lambobin sadarwa na mai tuntuɓar ko na'urar keɓancewa ba ta da lahani, (tuntuɓi billa ko lambobin da aka ƙone), RST 25 yana gane gazawar, da kuma ƙarfin ƙarfin amsawa, kuma yana kashewa gwargwadon saitin “Time Delay”
RST 25 yana sarrafa canjin lokaci. Idan akwai gazawar lokaci yayin aiki kwanar daga ƙarfin ƙarfin amsawa shine 30 ° kuma RST 25 ya gane wannan gazawar.