Mai Rage Karfe
◆Kayan aiki:Tagulla mai ɗauke da nickel
◆Aikace-aikacen:Ana amfani da mai faɗaɗawa idan girman ramukan da aka taɓa sun kasance
ya yi girma sosai ga wani gland. Yana samar da hanyar haɗi
tsakanin na'urorin shigar da kebul da kayan aiki waɗanda ba su da kyau
zare.
◆Kayan haɗi:Makulli, Injin Wanki Mai Hana ...
| 六角系列 Heksagon | 圆形系列 Da'ira | 外螺纹(D1) Zaren Waje | 内螺纹(D2) Zaren Ciki | 螺纹长度(GL) Tsawon Zaren | 高度 (H) Tsawo | 扳手径(D) Girman Spanner |
| HW-REM16/12H | HW-REM16/12C | M16×1.5 | M12×1.5 | 6 | 9 | 18 |
| HW-REM20/16H | HW-REM20/16C | M20×1.5 | M16×1.5 | 6.5 | 9.5 | 22 |
| HW-REM25/20H | HW-REM25/20C | M25×1.5 | M20×1.5 | 7.5 | 10.5 | 30 |
| HW-REM32/25H | HW-REM32/25C | M32×1.5 | M25×1.5 | 8 | 11.5 | 39 |
| HW-REM40/32H | HW-REM40/32C | M40×1.5 | M32×1.5 | 9 | 12.5 | 43 |
| HW-REM50/40H | HW-REM50/40C | M50×1.5 | M40×1.5 | 10 | 14 | 57 |
| HW-REM63/50H | HW-REM63/50C | M63×1.5 | M50×1.5 | 10 | 14 | 65 |
| HW-REPG9/7H | HW-REPG9/7C | PG9 | PG7 | 6 | 9 | 18 |
| HW-REPG11/9H | HW-REPG11/9C | PG11 | PG9 | 6.5 | 9.5 | 20 |
| HW-REPG13.5/11H | HW-REPG13.5/110 | PG13.5 | PG11 | 6.5 | 9.5 | 22 |
| HW-REPG16/13.5H | HW-REPG16/13.5C | PG16 | PG13.5 | 6.5 | 9.5 | 24 |
| HW-REPG21/16H | HW-REPG21/16C | PG21 | PG16 | 7.5 | 10.5 | 30 |
| HW-REPG29/21H | HW-REPG29/210 | PG29 | PG21 | 8 | 11.5 | 39 |
| HW-REPG36/29H | HW-REPG36/29C | PG36 | PG29 | 9 | 12.5 | 50 |
| HW-REPG42/36H | HW-REPG42/36C | PG42 | PG36 | 10 | 14 | 57 |
| HW-REPG48/42H | HW-REPG48/42C | PG48 | PG42 | 10 | 14 | 64 |
| HW-RE3/4-1/2BH | HW-RE3/4-1/2BC | G3/4" | G1/2 | 7.5 | 10.5 | 30 |
| HW-RE1-3/4H | HW-RE1-3/4C | G1′ | G3/4° | 7.5 | 10.5 | 40 |
| HW-RE1-1/4-1H | HW-RE1-1/4-10 | G1-1/4" | G1° | 8 | 11.5 | 50 |
Rubuta saƙonka a nan ka aika mana da shi
